The Shop > Tools

Couple of Odd Jobs

(1/2) > >>

Ginger Nut:
1st up was a few drill guides for an old Dowel Jig which I only had an 1/4"guide for. Made a 6mm, 8mm, 10mm. I used the 6mm straight off to align holes in the wheelchair rims for new hand grip rims.

 Next up today had to reduce wall thickness on an impact socket for oldest son for work original OD 20.87 reduced to 18mm and depth/reach lengthened.

RobWilson:
Nice going Ginger  :thumbup:

I often have to mod sockets and spanners for work , generally when you need tool  P# 753932gx87h to do the job  :lol: :lol:

Interesting drill jig , who  manufactured  it  ? 


Rob

Stilldrillin:
Nice one Ginner!  :clap: :clap:

It's a good feeling, when you can do, for others. Who can't........  :thumbup:

David D

Ginger Nut:

--- Quote from: RobWilson on April 04, 2015, 04:20:07 AM ---Nice going Ginger  :thumbup:

I often have to mod sockets and spanners for work , generally when you need tool  P# 753932gx87h to do the job  :lol: :lol:

Interesting drill jig , who  manufactured  it  ? 


Rob

--- End quote ---

Thanks Rob I had modified sockets in the past for work used the grinder back then non of the mechanic shops I worked in bar one had a lathe nor did I.

I can not find a makers mark on the drill jig it was my dad's I have to clean it a little might find something then.

Ginger Nut:

--- Quote from: Stilldrillin on April 04, 2015, 08:24:25 AM ---Nice one Ginner!  :clap: :clap:

It's a good feeling, when you can do, for others. Who can't........  :thumbup:

David D

--- End quote ---

Yes you are right there David and thanks

Navigation

[0] Message Index

[#] Next page