The Shop > Tools

Parting Off Tool Made From 1/64" Slitting Saw

(1/1)

sbwhart:
I though I'd do a video of the parting tool I made to make some spacers for the tiny Engine I just finished off. I had trouble parting off with my normal 1/16" parting tool it just bent the thin bar so I made this tool it's not my Original idea I saw it some ware can't remember ware.

Stew

     

John Rudd:
Stew,
Nice idea.... :thumbup:
Is  there something supporting the stock at the tail end?
Looks like there's something in the chuck?

sbwhart:
Hi John

Its just a bit of wire to catch the spacers, there that small they just lose them self s in the tray.

Stew

Navigation

[0] Message Index