The Shop > Our Shop

My New Shop

(1/4) > >>

SteveM:
I'm going to post a picture. Please delete if I've broken any rules! Here's my current shop in the back of my business. [embed=425,349][/embed] Before I post any more I'll wait for feedback. Last summer I purchased a house, 5 acres, and 30x50 shop on which I'm currently working. I hope to turn the day to day operations of my business to my step-son fairly soon and am improving the shop with that in mind:) Thanks for a great group, I've learned a lot lurking here!

John Rudd:
Hi Steve, :wave:
Judging by the make of tool chest you have there, I'd say you were across the pond...
That said, I'd be envious....because you have access to more tool merchants than we have here in the UK....(IMHO....)
Great shop you have there, but I need more fotos of your lathe and mill......I like drooling....  :D :D
Looks like a Shop Fox mill you have? Model?
More info required please.....
Got any pictures of stuff you've made?   :dremel:

SteveM:
 :Shop Fox 9 49 mill with 2 axis D RO. I added the Z axis. Some coincidence involved but I ended up with a Shop Fox 12x36 lathe with zero  hours for  bargain price! Sometimes lucky is better than  good. LOL.

Brass_Machine:
No rules broken!

Nice tools!

Eric

SteveM:
Have done a little more work in the new shop. Framed side walls, insulated, hung OSB, and painted.

Yesterday I cleaned up some of the mess in preparation for the next installment. Tucked this card file away under a stairwell and belive I can fit two more in that space.

I also painted two lateral file cabinets and built storage behind them. They will bracket a 10 or 12ft 30 inch wide bench once it's all complete. I presently deciding whether to try modifying some file cabinets for under bench storage.

Navigation

[0] Message Index

[#] Next page