The Craftmans Shop > New from Old
Portable power hacksaw
Manxmodder:
John,are the blades an odd size? if so couldn't you modify longer ones by shortening and making a new pin hole?
JD:
Manxmodder, yes you guessed, :bang: odd size 13"x1"x 1/8 @26 tpi, took the blade off earlier somebody has already modded it.
All I can find is 12 or 14 inch so will have to modify or buy a 12 or 14 blade and see which fits the best.
When I get a fit I will buy enough for me and my son :thumbup:
Thanks for the input.
John W
velocette:
Hi
Go with manxmadder and shorten blades to fit.
Tungsten Carbide Masonary Drill slow speed and heavy feed pressure until the tip just breaks through then lighten up on pressure.
Cutting Oil is essential.
Eric
velocette:
Hi
A 12 inch blade and modify the tensioner to fit would be easier than drilling blades.
The last inch on the blade length will not be missed.
Sorry for Double post as the extra info on your last post clinched it/
Eric
JD:
Eric thanks for that, I think 14" blade trial fit. if it doesn't go take an inch off the end.
The tip for the masonry drill is stored away, the tensioner would be the last resort.
John W
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version