Gallery, Projects and General > Project Logs
Mill Power feed
Darren:
I was thinking the same thing John,
Although the finish is much better than I was getting by hand it still could be improved upon. I too believe the tool grinding needs some more thought...I will work on it.
There are some other improvements that could be made to the circuitry...later when I've figured it out.
Darren:
John,
I've tried searching for that picture you put up with your flycutter shape, but I can't find it?
Do you know where it was? Or maybe put it here too when you get a moment :thumbup:
bogstandard:
Here you are Darren.
http://madmodder.net/index.php?topic=850.0
John
Darren:
Thanks John,
I had another go and reshaped the tool bit a little to look like this
The result was indeed a bit better, still getting some lines as you can see. Two bits of alloy, different finishes, I assume one is softer than the other.
Just practice and fettling now I guess. :)
Twinsquirrel:
Looks pretty good to me Darren!!
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version