| Gallery, Projects and General > Project Logs |
| Mill Power feed |
| << < (16/26) > >> |
| Darren:
I was thinking the same thing John, Although the finish is much better than I was getting by hand it still could be improved upon. I too believe the tool grinding needs some more thought...I will work on it. There are some other improvements that could be made to the circuitry...later when I've figured it out. |
| Darren:
John, I've tried searching for that picture you put up with your flycutter shape, but I can't find it? Do you know where it was? Or maybe put it here too when you get a moment :thumbup: |
| bogstandard:
Here you are Darren. http://madmodder.net/index.php?topic=850.0 John |
| Darren:
Thanks John, I had another go and reshaped the tool bit a little to look like this The result was indeed a bit better, still getting some lines as you can see. Two bits of alloy, different finishes, I assume one is softer than the other. Just practice and fettling now I guess. :) |
| Twinsquirrel:
Looks pretty good to me Darren!! |
| Navigation |
| Message Index |
| Next page |
| Previous page |