| Gallery, Projects and General > Project Logs |
| Mill Power feed |
| << < (24/26) > >> |
| Divided he ad:
Ok, so that I can do.... Does it have to be that messy? I'm sure I can tidy my bench up a little if it has to be the same! :ddb: Seriously, I have some vero board here that has been knocking around for a few years it certainly would suffice. I just need the relevant info and a quick circuit (what goes to where) diagram and I'll be off :thumbup: Good work that man.... And it's only Wednesday!! :nrocks: If we organise the list and who wants what and where the bits go then I'll be happy to put circuits together too :zap: I can solder quite efficiently, I just need to know what I'm soldering where! I'm liking where this thread is going :thumbup: Ralph. |
| Darren:
I'm having a bit of a problem, Looking around to order some parts... I have used a LT1084 adj regulator, they used to be two a penny avail almost anywhere. Now most electronics outlets have dropped them and I can only find them for around 8-10 quid a go. For a chip on its own that is just plain silly, you might as well buy a ready made module.... 50p each would be reasonable. I'll keep looking but if anyone can recommend an alternative please speak up :ddb: The only other way would be to use a LM317 with a 2n3055, but I've never liked the 317's cos they are so finiky. I'll keep looking...... |
| Divided he ad:
I've got a LM340T5 and a UA7812C on a circuit board in my hand..... Any good? I don't know what they do? I'll check for more tomorrow :) Ralph. |
| Darren:
The first one is a 5V regulator so no, dunno about the second.......have to look it up But, I've just bought ten LM338T's, never used them before but I think they will work....otherwise it's a different circuit and I know this one is reliable cos I've used it for years. Fingers crossed..... :ddb: |
| Darren:
Ralph, the second is a 1.5A 12v reg, useful, but not here. :thumbup: |
| Navigation |
| Message Index |
| Next page |
| Previous page |