| Gallery, Projects and General > Gallery |
| ed lights for mill,, |
| << < (5/8) > >> |
| Will_D:
--- Quote from: Colh on February 19, 2015, 07:08:09 PM ---When I dismantled my mill to fit the DRO scales I had the foresight to weigh the head - 27kgs. I will look for a strut with a power around 27 Newtons. --- End quote --- "So 1kg mass x 9,81 m/s^2 = 9,81N ~ approximately 10N." So you need 270 Newtons :doh: |
| steampunkpete:
--- Quote ---So you need 270 Newtons --- End quote --- In the words of a well known Time Lord "Correctamundo". (Yes) :) |
| mechman48:
I wonder what Isaac would make of all this jocularity.... & leaps in science... probably ROTFLHAO.. :scratch: George |
| stirling lad:
..So my mills head weighs around half an imperial slug......I see what you mean,,,..... where's the aspirin?? :palm: ...m.. |
| rleete:
I used a round "angel eye" ring. Sold for customizing car headlights. Bought 2 for a couple bucks, shipped. They are 12 volt, so require a separate power supply. for that I bought a wall wart adapter; one that's 110v in, 12v out. That was also a couple of bucks shipped. Both items were purchased on ebay. The ring is the perfect size to fit around the spindle of the mill. |
| Navigation |
| Message Index |
| Next page |
| Previous page |