| Gallery, Projects and General > Gallery |
| First bit of proper turning and threading. |
| << < (3/4) > >> |
| dawesy:
Thanks guys :) Yep all done on the old Churchill ;) Cap all done now bar knurling Seals going in the cap Russell You can just about see the undercut in this pic Going to practice knurling first before I do the cap :/ Also going to trim down the threads on the neck as I think I must have knocked the verniers when I measured it to get the depth for the cap :( |
| BillTodd:
Caution: If that is stainless steel - grease the threads with copper slip (anti-seize) or you may not get it apart again ! :thumbup: |
| dawesy:
Thanks for the heads up bill but its aluminium ;) |
| PJW:
A nice bit of turning, a job to be proud of :clap: Peter |
| dawesy:
Thank you Peter. The tank is almost finished |
| Navigation |
| Message Index |
| Next page |
| Previous page |