| Gallery, Projects and General > Project Logs |
| The CNC experiment build. |
| << < (12/21) > >> |
| Sid_Vicious:
Have you considered polishing the pebbles like they do with stones in jewelry. A machine like a concrete blender knocking the sharp edges of each other (don't remember the correct name of the machine now, Tumbler maybe) |
| NeoTech:
No not really, but now i do!. That would probably work - i need to get me a concrete blender im guessing, but a flat top blender would probably be what one would want.. need to take a dive into the adverts. |
| Sid_Vicious:
There are a lot of videos on youtube about rock tumbling that might give you some ideas on how to do it, but it looks like that it takes some time and are a lot of noise from the process. I'm not to sure that a toploader is the answer because a sideloaded one shifts it more around at least in my mind. |
| NeoTech:
Yeah sideloaded "falling tumbler" throws it around more, and puts alot of more air into the mixture as well. and i imagine one would wanna keep as much air as possible out of this. =) |
| Sid_Vicious:
If you look at the videos you will see that most of it are in closed containers filled with water and some grit I was just using concrete blender as an example. |
| Navigation |
| Message Index |
| Next page |
| Previous page |