Gallery, Projects and General > Project Logs
The CNC experiment build.
<< < (8/21) > >>
NeoTech:
Recipe dont say how much epoxy. is it 10% on weight or 8% ??
RotarySMP:
Because I am using super fine alumina, I'll do a test peice with 10% first.

By the way, nice motion hardware collection you have there.

Mark
NeoTech:
Thanks, need to start phase to, get steel parts, do casting experiments.. Get a spindle and spindle motor.. the last one is elusive. =)
awemawson:

--- Quote from: NeoTech on February 19, 2015, 06:46:20 PM ---You have a link to what im looking for would be much appreciated. :)

--- End quote ---

This is the top(ish) end of the market:

http://www.sick.com/group/EN/home/products/product_portfolio/industrial_sensors/Pages/proximity_sensors.aspx

There are cheaper ones, ebay abounds
Will_D:
Now all this talk about graded agregates sparked an unused neuron:

Concrete Springs:
Remember seeing a video that if tou mix GRADED glass spheres (i.e.Start with 2 mm dia spheres, the gap between them is Xmm so you add enough X dia. spheres. Now the gap is Y so you add Y dia spheres. Eventually you stop and add portland cement to lock it all together. Result is a Coil Spring.

Now back up to date:
Quick Google to check if my (only one) functioning neuron was Ok, I came up with thi spaper:

http://www.concrete.ie/downloads/ultra%20high%20strength%20concrete.pdf

NJoy!  :smart:
Navigation
Message Index
Next page
Previous page

Go to full version