Gallery, Projects and General > How do I??
Trigonometry Homework for the Maths Gurus: Please help :)
mklotz:
--- Quote from: awemawson on January 31, 2015, 11:36:06 AM ---
It is the mathematical relationship between the work rotation (represented by the angle of the line L) and the movement of the tool slide (represented by the length of line L) that I am trying to build into my algorithm.
When there are less grandchildren crawling over me I'll try and get a sketch drawn up
--- End quote ---
Rather than do any more drawings I think you should spend some time studying what I wrote. I've given you a solution for L in terms of BAD and BAC which is what you asked for. If you can't understand it I'll be glad to answer specific questions you might have.
awemawson:
--- Quote from: Manxmodder on January 31, 2015, 11:46:43 AM ---Andrew,I don't know how how helpful this is but by coincidence I was sent an email offer from a metrology seller yesterday. They are offering for sale a specialised hand held machinists calculator which does trig,sin,tan,arctan and a great deal of other math specifically associated with shop calculations.
I am going to ask other posters opinions/experiences of this calculator in another thread.
Link to site advertising: http://www.machine-dro.co.uk/engineers-calculator-machining-reference-tool.html?___SID=U
.....OZ
--- End quote ---
Thanks Oz, but the intention is to write a canned cycle that I can call up using the inbuilt trig functions of the controller. It is to be a generalised sub routine to mill a flat on round work - be it one or many facets.
awemawson:
--- Quote from: philf on January 31, 2015, 11:25:40 AM ---Andrew,
Maths was always my favourite subject and it's nice for someone to set such a brainteaser.
Try:
L = (R x sin(90-BAC/2))/(sin(90+BAC/2-BAD))
My first effort had one too many "/2" in. I have now checked it with a spreadsheet and an Autocad drawing.
Hope that's what you needed.
Phil.
--- End quote ---
Thanks Phil,
You are working on the lines I need - no pun intended :thumbup:
philf:
--- Quote from: awemawson on January 31, 2015, 12:20:12 PM ---
Thanks Phil,
You are working on the lines I need - no pun intended :thumbup:
--- End quote ---
Andrew - I thought a diagram might help. Phil
philf:
--- Quote from: Manxmodder on January 31, 2015, 11:46:43 AM ---Andrew,I don't know how how helpful this is but by coincidence I was sent an email offer from a metrology seller yesterday. They are offering for sale a specialised hand held machinists calculator which does trig,sin,tan,arctan and a great deal of other math specifically associated with shop calculations.
I am going to ask other posters opinions/experiences of this calculator in another thread.
Link to site advertising: http://www.machine-dro.co.uk/engineers-calculator-machining-reference-tool.html?___SID=U
.....OZ
--- End quote ---
Hi Oz,
I've seen the calculator before. It may help you working out some trig but I doubt it would give you a formula to build into a program or spreadsheet which is what I believe Andrew needed.
The speeds/feeds feature would possibly be the feature of most use to me.
A couple of days ago I found a free online speeds/feeds calculator called FSWizard: http://zero-divide.net/index.php?page=fswizard . From the same author there is a paid-for program called HSMAdvisor which has geometry, threads etc as well as speeds and feeds.
I tried the online calculator yesterday working out feeds and speeds for a CNC milled loco component and it worked fine.
There are free Android/iOS versions with very few materials in the database but I will be buying an Android version which has many materials. It's only $29.99 (£20) which is about the cost of a carbide cutter so, if I don't break any cutters, will very soon pay for itself.
Phil.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version