The Craftmans Shop > PowerSports

Rearsets

<< < (2/2)

John Stevenson:
If you have CNC, something not mentioned how about you engrave large raised letters for grip with your name / bike name/ anything ? on ?

Slice of this ?

crazypj:

--- Quote from: CHA5 on January 30, 2015, 01:58:00 PM ---
--- Quote from: Brass_Machine on January 30, 2015, 01:09:49 PM ---Let's talk.  :beer:

I have designed rearsets for a few different bikes.

Eric

--- End quote ---

Do you have any calculations on the optimum postion of the lever pedals according to how far back the footrests are set?

I know where my original pedals are in relation to the original footrest, but I need to be able to calculate the angle of my foot if it moves 1" or 2" back?

--- End quote ---

The easiest thing to do would be to take a profile pic with you on the bike.
 Many CAD programs will allow importing pictures, just make sure you have some sort of scale (rule, tape measure, etc) and high res pic. Should then be simple enough to make lines through major pivot points (knee, ankle, etc) and get the required angles

Navigation

[0] Message Index

[*] Previous page