| Gallery, Projects and General > Gallery |
| Gnarly Knurled Knobs - Don't Knock My Knurler |
| << < (2/3) > >> |
| Arbalist:
I'm viewing on an iPad with Safari and the pictures are showing fine. |
| Will_D:
No probs on a Win 7 laptop |
| mechman48:
Seems to have resolved itself, nice work George |
| tom osselton:
Nice knurler! Had brainfart though, you still have to adjust the z position to ensure the contact of both wheels, my thought is if the complete head could pivot a small amount up and down it would be self centering equalizing the presure on both wheels but remain rigid in the toolpost! Any thoughts guys? |
| sparky961:
--- Quote from: tom osselton on January 16, 2015, 04:59:52 PM ---Nice knurler! Had brainfart though, you still have to adjust the z position to ensure the contact of both wheels, my thought is if the complete head could pivot a small amount up and down it would be self centering equalizing the presure on both wheels but remain rigid in the toolpost! Any thoughts guys? --- End quote --- The way its designed, it does center itself in the Z direction. The two arms float with respect to the body. |
| Navigation |
| Message Index |
| Next page |
| Previous page |