| Home Base > Introductions |
| Hello |
| (1/3) > >> |
| Witness:
Hello just to introduce myself, I'm coming up to retirement plasterer by trade(I'm glad thats over). Well I've always been interested in machining so I bought myself an old Myford ML10 which needs a bit of work and a small chinese lathe I'm using at the moment. The Myford is working but all the Feed/Leadscrews are worn and need replacing so no thread work is possible on it at the moment. I hope to buy a mill in the future but only a dream at the moment. I came accross this site through youtube so I hope to pick your brains and learn all the tricks from you. Rob |
| Joules:
Welcome aboard Rob, where in the UK are you ? Excuse my assumption YOU are in the UK. |
| DavidA:
Rob, hi. Welcome. We seem to spend more time fixing or modifying our machines than actually making things with them, so you will be in good company. Dave. |
| Brass_Machine:
Hi Rob :wave: Welcome to the collective :borg: Eric |
| vtsteam:
Hi Rob, welcome!! :wave: :beer: |
| Navigation |
| Message Index |
| Next page |