The Shop > Electronics & IC Programing
Raspberry Pi, Arduino, Shield, GRBL, CNC, etc.
vtsteam:
I had problems connecting to the RPi from the Android tablet. The laptop seemed more stable, but it also failed a few times.
After a lot of trials I found that the problem seemed to lie with the WPA supplicant in the RPi. It seems to periodically lose lock with the wireless router, and reinitialize the connection. This leaves an RDP connection in the cold, and they never seem to re-connect without re booting the RPi.
So other possibilities are running the RPi in ad-hoc mode (which would make better sense anyway for something like this). Or running the RPi from a hard wired (ethernet) connection. Unfortunately for that last option, it wouldn't work with a tablet, since I've never heard of a tablet that has an ethernet connection (kinda defeats the purpose of a tablet!). But I suppose Pi could be hard wired to a wireless router to dispense with WPA, and then the router connects to the Tablet via wireless connection. That might be stable.
Or one other possibility -- wait for the new RPi touchscreen to be announced and just run the RPi stand alone -- which would probably be ideal, except for the wait. And possible extra cost. The only problem might be whether it has enough resolution @ 7" screen size to be usable with the Grbl controller software.
BTW, ordered three 425 in.oz steppers at a price I couldn't pass up.
vtsteam:
I copied the root partition of the Raspberry Pi to an older 80 gig portable USB powered hard drive, and made a couple edits to the config file, so now the Pi boots from the SD card only and then immediately transfers over to running from the hard drive.
80 gigs is kinda overkill for this application, but it was a case of using what I had. the drive is only the size of the Rpi board and about 1/2" thick, so it's still a very compact package.
I'm thinking about making a micro rack tower to hold the boards, drive, and stepper drivers. Everything has a similar footprint, and I'd rather go vertical than have it spread out over precious benchtop space. I think a micro server rack would look kind of cute, too.
awemawson:
Fit in with the new small workshop theme as well :lol:
gerritv:
Don't neglect the ceiling, when horizontal space is limited, vertical is the way to go.
vtsteam:
My thoughts exactly, guys. :beer:
For anybody interested, here's a nice website with a bunch of projects and interfacing information for the Raspberry Pi computer:
http://raspberrypihobbyist.blogspot.com
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version