| Gallery, Projects and General > Project Logs |
| Elmer's horizontal mill engine. |
| << < (8/23) > >> |
| Ginger Nut:
Looks great mind if I pull up a chair view the action. |
| modeldozer:
Hi Ginger Nut. Thanks, feel free to view the action. Abraham |
| vtsteam:
Nice! :thumbup: :clap: |
| modeldozer:
Tkanks Steve. Abraham |
| modeldozer:
Hi fellow modders, For the next part a piece of aluminium was machined square. The centre was located. And the top machined and drilled to form this, A template was printed and fixed to the rotary table, This was used to locate the part and machine the top radius. The part was reset in the vice, And split with a slitting saw. The bottom half was machined to length and the holes taped. The two halves bolted together. And fitted on the base assembly. By now it should be clear as to what it is. The hole for the bearing will be line bored with both bearing posts in place. For the other post a slab of aluminium was again machined square and to size. That’s all for now. Cheers Abraham |
| Navigation |
| Message Index |
| Next page |
| Previous page |