The Shop > Electronics & IC Programing

UK electronics forum

(1/4) > >>

Will_D:
Can anyone recommend a good UK based electronics forum.

By good I mean as good,great and friendly as MadModders
 :ddb:   :nrocks:  :ddb:

John Swift:

Hi Will

Have you any electronics experience ?

I'm not a member my self , but have you had a look at  :-

http://www.epemag3.com/epe-chatzone.html
http://www.chatzones.co.uk/discus/messages/7/15585.html?1416590383

    John

awemawson:
I hesitate to recommend any. I was a member of one electronics forum, and someone wanted pictures of the Traub lathe I'd been working on, so I posted a link to the thread here. Where upon 'The Sword of Damocles' fell on me and I was roundly condemned for linking to other forums. They were an ignorant lot anyway  :ddb: 

John Rudd:
Will,
I'm over on epe forum as Chippie...( a loose connotation derived from integrated circuits...ic, chip etc. )

Will_D:
Thanks for the info!

In the 60s I used to get Wireless World then moved to Practical Radio then into Practical Electronics, so yes I've fried a few bits and survived the odd 350 volt shock from a traffo!

Best thing every was a mains traffo which was fitted with a diode rectifier valve that emitted a large amount of UV and the affore mentioned 350 v DC

Am trying to get the Microwave Oven Transformer Induction heater project working.

Already got the M.O.T spot welder doing 0.8 to 0.8 mm stainless. Not that I want to weld sheet its more for stainless mesh/fine gauze for filtering wort!

I just love mixed hobbies!

Navigation

[0] Message Index

[#] Next page