| The Shop > Electronics & IC Programing |
| UK electronics forum |
| (1/4) > >> |
| Will_D:
Can anyone recommend a good UK based electronics forum. By good I mean as good,great and friendly as MadModders :ddb: :nrocks: :ddb: |
| John Swift:
Hi Will Have you any electronics experience ? I'm not a member my self , but have you had a look at :- http://www.epemag3.com/epe-chatzone.html http://www.chatzones.co.uk/discus/messages/7/15585.html?1416590383 John |
| awemawson:
I hesitate to recommend any. I was a member of one electronics forum, and someone wanted pictures of the Traub lathe I'd been working on, so I posted a link to the thread here. Where upon 'The Sword of Damocles' fell on me and I was roundly condemned for linking to other forums. They were an ignorant lot anyway :ddb: |
| John Rudd:
Will, I'm over on epe forum as Chippie...( a loose connotation derived from integrated circuits...ic, chip etc. ) |
| Will_D:
Thanks for the info! In the 60s I used to get Wireless World then moved to Practical Radio then into Practical Electronics, so yes I've fried a few bits and survived the odd 350 volt shock from a traffo! Best thing every was a mains traffo which was fitted with a diode rectifier valve that emitted a large amount of UV and the affore mentioned 350 v DC Am trying to get the Microwave Oven Transformer Induction heater project working. Already got the M.O.T spot welder doing 0.8 to 0.8 mm stainless. Not that I want to weld sheet its more for stainless mesh/fine gauze for filtering wort! I just love mixed hobbies! |
| Navigation |
| Message Index |
| Next page |