| The Shop > Our Shop |
| Rev counter for miller |
| (1/4) > >> |
| PJW:
I have just fitted this rev counter on my miller, the on /off switch & speed control are all in one, not ideal. this unit was pointed out to me by Sterlinglad, Thanks! it was purchased on a well known auction site listed as 4 Digital Tachometer RPM Speed Meter Red LED + Proximity Switch Sensor, it only cost £6.99 and was fitted an an hour, it works a treat!!! |
| drmico60:
Hi PJW, I have just bought a similar tacho. There is no wiring instructions in English just some Chinese characters on the 5 pin lug on the display. Have you any info on what connects to what? Mike |
| Will_D:
On the strength of this vaguely interesting thread I have just lashed out 7 quid for a blue one. Do they supply a bit of magnet? The sensor is a Hall effect (ie magnetic) so you just mount a small bit of magnet on the rotaing bit and position the sensor between 1 and 10 mm from it and Bob should be your Da's Bro However when it arrives it may be a case of "Fanny is not my Aunty" |
| chipenter:
I have two of thees and the wiring instructions were on the ebay post , nothing came with them one came with a magnet and one without . |
| mfletch:
be warned the magnet only works one way |
| Navigation |
| Message Index |
| Next page |