Looking for a left hand thread bolt...

[DarrenUK]

Hope someone can help me out, i am looking for an M10 x 1 left hand thread bolt (any length), i only need one and after searching the internet cannot find them available in the UK. Anyone have one spare? or know of where i could buy one?

Thanks
Darren

[lordedmond]

Try evil bay

http://www.ebay.co.uk/itm/like/251275439910?limghlpsr=true&hlpv=2&ops=true&viphx=1&hlpht=true&lpid=108&chn=ps&device=t&adtype=pla&crdt=0&ff3=1&ff11=ICEP3.0.0-L&ff12=67&ff13=80&ff14=108&ff19=0


http://www.ebay.co.uk/itm/M10-x-1-5-mm-Half-Nuts-left-hand-thread-pack-of-10-pieces-/380861099350?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item58ad172d56

Not a bolt but threaded rod and nuts
Stuart
S

[DarrenUK]

Try evil bay

http://www.ebay.co.uk/itm/like/251275439910?limghlpsr=true&hlpv=2&ops=true&viphx=1&hlpht=true&lpid=108&chn=ps&device=t&adtype=pla&crdt=0&ff3=1&ff11=ICEP3.0.0-L&ff12=67&ff13=80&ff14=108&ff19=0


http://www.ebay.co.uk/itm/M10-x-1-5-mm-Half-Nuts-left-hand-thread-pack-of-10-pieces-/380861099350?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item58ad172d56

Not a bolt but threaded rod and nuts
Stuart
S

Thanks but the rod and nuts there are M10 x 1.5mm, I am in need of M10 x 1mm

Darren

[Artie]

Personally, I cant think of a better reason to learn to cut threads on the lathe..... 

[DarrenUK]

Personally, I cant think of a better reason to learn to cut threads on the lathe..... 

I'd love to but unfortunately I only have a milling machine (SX3) I do not own a lathe yet.

Darren

[vtsteam]

Any fellow hobbyists in your area?

[DarrenUK]

It's ok now, someone on another forum has kindly offered to make what I need.

[vtsteam]

There you go!