Gallery, Projects and General > Mod-Ups!

Pipe and Bolt Engine Mod-Up

<< < (16/50) > >>

vtsteam:
Then I sawed off the excess:

vtsteam:
What it looked like:

vtsteam:
Turned it upside down in the drill vise, marked out and drilled through w/tapping drill for 4-40 screws.

vtsteam:
Then sawed it off to split bearing:

vtsteam:
Drilled cap for clearance, countersung, and then tapped one side of the big end. Then replaced the cap, screwed it down and tapped through the other side as a guide:

Navigation

[0] Message Index

[#] Next page

[*] Previous page