| The Shop > Our Shop |
| Working on a new tiny shop |
| << < (17/38) > >> |
| awemawson:
That's pretty impressive rust stripping Steve :thumbup: |
| SwarfnStuff:
Congrats, a good solution with an equally good result. :clap: Don't get it too pretty or you won't want to use it in case you mark it? :lol: |
| backofanenvelope:
very interesting! I learn something new every day and I have a couple of things that would benefit from this process. Looks like I am going to have a busy year ahead.. :) TomC |
| vtsteam:
Thanks Andrew, Swarf, BOE :beer: I bought a sheet of pegboard the other day, and it's started snowing again, so I figured I'd better cut it up and get it inside. It's "tempered" which means water resistant, but I don't like to get it wet for long anyway. I'm looking forward to working inside one of these days! :loco: |
| vtsteam:
I ripped up some 1-1/2" square strips from 2 by material to hang the pegboard from. And I used a Ramset nailer to attach the cleats to the concrete block walls. These use a .22 charge to propel a hardened nail into the block. |
| Navigation |
| Message Index |
| Next page |
| Previous page |