« previous next »
Pages: [1]   Go Down

Author Topic: molding bed lathe Gingery version and scraping  (Read 5661 times)

Offline salvarane

  • Jr. Member
  • **
  • Posts: 12
molding bed lathe Gingery version and scraping
« on: November 26, 2014, 10:16:35 AM »
Sharpen the chisel and scraping the bed of the Gingery Lathe version
« Last Edit: November 26, 2014, 10:57:47 AM by salvarane »
Logged

Offline DavidA

  • Hero Member
  • *****
  • Posts: 1219
  • Country: gb
Re: molding bed lathe Gingery version and scraping
« Reply #1 on: November 26, 2014, 01:31:48 PM »
In that top picture you don't appear to be wearing safety glasses.

Very dangerous when grinding.

Believe me ,  I have twice has to go to hospital to have metal removed from my eyes.  And on both occasions I was wearing them.

Don't risk it.

Dave
Logged

Offline salvarane

  • Jr. Member
  • **
  • Posts: 12
Re: molding bed lathe Gingery version and scraping
« Reply #2 on: November 27, 2014, 03:08:15 PM »
Ciao DavidA, thanks for your suggestion, but only for this picture, I made beautiful :),  I work always using safety glasses and all necessary in my daily work.

Logged

Offline vtsteam

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 6699
  • Country: us
  • Republic of Vermont
Re: molding bed lathe Gingery version and scraping
« Reply #3 on: December 03, 2014, 07:45:38 PM »
Looking forward to this! (Brings back memories)

Looks like you've made a surface plate ala Gingery as well -- glass on automotive putty.

I put in many hours of scraping on the lathe bed. The carriages were easier.
Logged
I love it when a Plan B comes together!
Steve
https://www.youtube.com/watch?v=4sDubB0-REg

Offline backofanenvelope

  • Jr. Member
  • **
  • Posts: 70
  • Country: gb
    • !5 Minute Modeller
Re: molding bed lathe Gingery version and scraping
« Reply #4 on: December 04, 2014, 10:03:52 AM »
Also looking forward to this and am amassing ALU to melt down next year.
Logged
*** Master Guild of Procrastinators ***
Pages: [1]   Go Up
« previous next »