Gallery, Projects and General > Project Logs
Poppin Engine build.
Stilldrillin:
Ian.
If you don't tell us. We'll never know about your, "good enoughs". :thumbup:
You're doing a great job. Progressing well...... :clap:
David D
SwarfnStuff:
"(very slightly isn't really an Engineering term is it?)" Oh I don't know? It fits right in there with, "a whisker, a smidgeon, (aka smidge) and a tiny bit". :lol: Depends on the accuracy really needed for the job in hand.
John B,
p.s. I guess i shall have to look at reply with quote.
ian_in_the_midlands:
Weekend spend sawing/drilling/filing.
(Note to myself - find space in garage for milling machine and buy one!)
I decided I would follow the plans and put the radiuses in.
I still have some more filing and polishing to do. I also need to cut the slots for the crank and tap the holes for the screws that clamp the bearings.
Some pictures of the progress:
Stilldrillin:
--- Quote from: ian_in_the_midlands on January 04, 2015, 03:27:16 PM ---Weekend spend sawing/drilling/filing.
(Note to myself - find space in garage for milling machine and buy one!)
--- End quote ---
Ian.
You know it makes sense........ :D
--- Quote from: ian_in_the_midlands on January 04, 2015, 03:27:16 PM ---Some pictures of the progress:
--- End quote ---
Nice! :clap: :clap:
That's a lot more progress, than I've managed. Since before Christmas Eve. :palm:
The most comforting thought..... The hardest part, is behind you now. Mebbe! :thumbup:
David D
awemawson:
Oh dear . . now you are HOOKED :ddb:
Yes you NEED that milling machine, after all EVERYONE needs a milling machine, but that's just the start, next it'll be a shaper or some other machine, then before you know it it'll be an extension on the back of the garage :lol:
It's an addiction - I should know I'm addicted :bugeye: :bugeye: :bugeye:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version