Gallery, Projects and General > Gallery

DIY Table saw tested and qualified to use in the shop !

(1/3) > >>

ksor:
Here is an old project I tested today:

More details here and you can Google Translate to the right just under the menu line - choose whatever language you like in the combobox:

http://kelds.weebly.com/lille-bordsav.html

Meldonmech:
Hi Keld

             That is a very useful addition to your workshop, and now seems to be working very well. What is the diameter of your saw blade, and how many teeth does it have?  What was the final speed in revs/min of the blade?
    I bought a double bearing spindle having a cast iron body, years ago with the intention of making a woodworking saw bench. I never got round to making it,  because I was building a garage. After seeing your metal cutting saw think I will make one similar, as I have also now got a motor.  Only thing I have not got is a lot of space.


                                                                      Cheers  David

DavidA:
Keld,

Nice job.

David,

If you're short of space you could make the saw as a bolt-on to your lathe,  Drive it from a pulley held in the chuck.

Dave.

ksor:

--- Quote from: Meldonmech on November 09, 2014, 11:52:12 AM ---Hi Keld

             That is a very useful addition to your workshop, and now seems to be working very well. What is the diameter of your saw blade, and how many teeth does it have?  What was the final speed in revs/min of the blade?
    I bought a double bearing spindle having a cast iron body, years ago with the intention of making a woodworking saw bench. I never got round to making it,  because I was building a garage. After seeing your metal cutting saw think I will make one similar, as I have also now got a motor.  Only thing I have not got is a lot of space.


                                                                      Cheers  David

--- End quote ---

Diameter 120 mm - teeth ?? maybe 100
RPM on the saw blade, ??? the motor runs 2850 and has the smallest pulley ... I think RPM (saw blade) 2000
Motor is HP 1/4 3 X 240V but running on 1 fase.

I plan to use mine for modelling wood too

Meldonmech:
Hi Keld

                               Thanks for the details

                                                                  Cheers David

Navigation

[0] Message Index

[#] Next page