| The Shop > Tools |
| Drill Depth Stop |
| (1/2) > >> |
| sbwhart:
Hi Madmodders My Startright drill has an adjustable depth stop the only problem is that it doesn't stay put it moves, the solution loc-nuts Into the old scrap box for some stub ends of steel, into the three jaw chuck turn the dia and nurl , drill:- starting with centre drill, then 8mm, then 12mm then 14.2 mm then tap M16 then part off to length. Job Done :thumbup: This will make the drill a far more usefull and accurate bit of kit. Cheers Stew |
| Brass_Machine:
Cool Stew... Nice job. :borg: Eric |
| bogstandard:
Good one Stew, Quickie job fixes problem. :ddb: :ddb: Bogs |
| sbwhart:
Thanks chaps I'm trying to get some of those little niggly little jobes done before I start back on the loco, I've got a bad habit of getting fully absorbed with one objective and putting other jobs off and making do with their shortcommings:- thats just me. Stew |
| Darren:
It's nice when you can make these bits init :thumbup: |
| Navigation |
| Message Index |
| Next page |