The Shop > Tools

Taking the woble out of a Grinder

<< < (2/2)

Stilldrillin:
Stew,

Well told & shown.....  :clap:

I did the same thing to my cheapo grinder, just over a year ago, as I couldn`t tighten the wobbly wheels!
One unscrewed as I tightened the other!
Not enough friction between washer & tiny step.....  ::)

My 1" dia bushes are a push fit over the .6??" dia portion, with a 1mm wide portion at .500" bore as a dead stop against the support step.

I held my washers in my outside chuck jaws, & faced the boss/ bush location area only.

No more built in wobbability factor!  :thumbup:

Good feeling innit?  :ddb: :ddb: :ddb:

David D

Navigation

[0] Message Index

[*] Previous page