The Shop > Tools
YAHHGR
John Rudd:
Well finally finished my rendition of Harold Hall's grinding rest.....
Not sure when I started it, years ago I'm sure!
John Rudd:
I cant seem to rotate the image.....
John Rudd:
Anyway you get the gist of it....
I'm quite pleased with it, need to stRt the accessories now to make it useful.... :coffee:
Arbalist:
Ooh, nice John. There's a build log on one of these going on somewhere at the moment. It's on my to do list. Can we see some pics or better still video of you using it when you're ready? I'd particularly like to see if drill bits can be sharpened using this jig?
John Rudd:
AFAIK, it will sharpen end mills with the appropriate fixtures described in the book...I see no reason for it not to sharpen drill bits..
It would need a suitable holder and a stop attaching to the drill bit being sharpened to both lands are ground equally....
I did have one of the MachineMart drill sharpening units but found it hit and miss because there was no way to avoid over grinding ....... :coffee:
Navigation
[0] Message Index
[#] Next page
Go to full version