Gallery, Projects and General > Project Logs
Titivating a Wire EDM Machine
<< < (6/35) > >>
awemawson:
However if you contrast these two pictures you can see it is progressing
hermetic:
Thanks for the link to the book Andrew, very interesting, I get it now.
Phil. :bow:
No experience with this type of kit, I will continue to follow with great interest.
Learning all ze time!
micktoon:
Hi Andrew , Interesting post and well explained. It looks like the acid is doing its job, good luck with the project, I will be interested to see it running, I remember seeing skips of the used wire in the scrapyard.
  Cheers Mick.
awemawson:
A few more hours in the citric acid bath and at last things have come up reasonably clean - certainly enough for me to be able to start dismantling with some confidence of success.


awemawson:
My main concern was getting the insulators off without cracking them. They are machinable ceramic, so could be re-made, but that stuff is horrendously expensive
Navigation
Message Index
Next page
Previous page

Go to full version