Gallery, Projects and General > Project Logs
Cheepo toolpost grinder
(1/4) > >>
chipenter:
ARC do a straight shank collet chuck http://www.arceurotrade.co.uk/Catalogue/Collets/ER-Milling-Collet-Chucks-Straight-Shank thats a spindle waiting to be mounted ,ordered a ER16 chuck yesterdat it came this morning , a set of collets from ebay http://www.ebay.co.uk/itm/201005172227?_trksid=p2060778.m2749.l2649&var=500211503341&ssPageName=STRK%3AMEBIDX%3AIT and I am halfway there ,
trevoratxtal:
More! More! Chipenter
You seem to have the making of a great lathe add on.
Thanks for posting.
All the best
Trev.
chipenter:
An offcutt of 1" hex bar was drilled and the bearing receses cut and 20TPI thread cut , bearings started and the spindle pushed in it feels free and smooth , will test the run out tomorow .
millwright:
I like the idea Jeff a ready made spindle almost, and the collets are cheap enough, it all depends on the run out. Hope its ok for you.


John
chipenter:
/not a lot of time today clocked up with bearings halfway in gives a runout of 1 1\2 thou and half a thou pulling the head , good for the price and for what I want.
Navigation
Message Index
Next page

Go to full version