| Gallery, Projects and General > Project Logs |
| Mill vice backstop |
| << < (10/10) |
| Bogstandard:
Very nice indeed Scott. An oldie but goodie. Mine is still working as good as the day it was made, and it is used all the time, and it looks like yours will do the same. Well done John |
| DaveH:
--- Quote from: Bogstandard on June 20, 2011, 01:48:04 AM ---An oldie but goodie. John --- End quote --- Just like me! :ddb: :ddb: :ddb: :ddb: :ddb: :ddb: :ddb: :beer: DaveH |
| Pelallito:
John, Thanks for this write up! I am in the process of making one. I still have to make the steel bars and small handle. I had some hex stock on hand that I used for parts 1 and 3. Part 2 I chain drilled and tried cutting between them with my Atlas. It did not like having the table lifted under the cutter, but it did cut through. I then set up my lathe milling adapter and cut some more. Since it was not a rigid setup, I had to finish the slot with some filing. Then I made part 3 to fit the slot. :doh: I hope to finish it today. Fred |
| Pelallito:
It is almost finished. I still want to polish the parts, but it is usable. I cut an 1/8" slot in the stop rod instead of a flat. The locking piece rides in the slot. It is also a little smaller than Johns. Hopefully I will be able to post pictures. Sorry for the photos, but it was my camera phone. Thanks again, Fred |
| buffalow bill:
Bogs, and all other authors on this site. Please accept my thanks for your advice and guidance through all your posts. :thumbup: :thumbup: :thumbup: Thank you, a merry Christmas and a happy and prosperous new year to you all. Bill |
| Navigation |
| Message Index |
| Previous page |