« previous next »
Pages: [1]   Go Down

Author Topic: Boxford aud  (Read 3464 times)

Offline wayne47

  • Newbie
  • *
  • Posts: 2
Boxford aud
« on: June 18, 2014, 07:44:38 PM »
Hi anybody know where I can get half nuts for boxford aud ?
Logged

Offline JD

  • Full Member
  • ***
  • Posts: 154
  • Country: england
  • Gosport Hampshire UK
Re: Boxford aud
« Reply #1 on: June 19, 2014, 02:32:50 AM »
wayne47
I have a Boxford CUD and here in UK I use www.g&mtools.co.uk  on 44 (0) 1903 892510 or sales@gandmtools.co.uk
or Tony Griffiths www.lathes.co.uk  tony@lathes.co.uk 44-1298-871633) this last one is a large library of info of most lathes, Mills, Drills etc made world wide.

John
Logged
If you cant fix it hit it with a bigger hammer

Offline chipenter

  • Hero Member
  • *****
  • Posts: 909
  • Country: gb
Re: Boxford aud
« Reply #2 on: June 19, 2014, 03:06:36 AM »
Another source http://www.latheparts.co.uk/ half nuts are £45 .
Logged
Jeff

Offline wayne47

  • Newbie
  • *
  • Posts: 2
Re: Boxford aud
« Reply #3 on: June 19, 2014, 05:07:34 PM »
Thank you for reply am trying both places
Wayne
Logged

Offline Marcus

  • Newbie
  • *
  • Posts: 1
Re: Boxford aud
« Reply #4 on: September 07, 2014, 11:22:37 AM »
Wayne,

You can still buy new spares from Boxford. They no longer make the manual lathes, but they have a stock of spares. Quite expensive, but handy for the odd part, and very helpful too.
I have an AUD MkIII and have recently bought spare thrust races for the cross-slide feedscrew. I have occasionally bought spares from other suppliers, but they don't seem to last as long.

www.boxford.co.uk

Marcus
Logged
Pages: [1]   Go Up
« previous next »