MadModder

The Breakroom => The Bookshelf => Topic started by: PTsideshow on December 14, 2009, 09:55:47 AM

Title: Blacksmithing Projects
Post by: PTsideshow on December 14, 2009, 09:55:47 AM
Blacksmithing Projects
Percy W Blandford
Dover Publications
copyright ©2006
ISBN 0-486-45276-X
originally copyrighted ©1988
ORIGINAL TITLED 24 BLACKSMITHING PROJECTS
Published by TAB BOOKS
Paperback
Dover Books UK (http://www.doverbooks.co.uk/)

Dover Books USA (http://store.doverpublications.com/)

(http://i35.photobucket.com/albums/d200/ptsideshow/assorted/welding%20books/Books0513.jpg)

This is another great one for those starting out in the area of smithing. With 24 main projects plus some that have more than one or enough variations to get one busy for a while. Honing the simple skills sets that will add to the overall skills needed to take on more detailed and complicated projects in the future.

Each Project set is a chapter, with clear and concise line drawings of the parts and project. Not drafting drawings, but drawings that will leave no doubt about what one needs to do.

Starting with a brief introduction on smithing and the projects in this book. as free standing or starting point for other things.

index

 Now most people that have been at smithing for any length of time may find this book simple for them or they can find it a kick start for getting over that fence for their next project.