MadModder

The Shop => CNC => Topic started by: msimpson on July 22, 2017, 12:51:13 AM

Title: My CNC/PC controller Enclosure
Post by: msimpson on July 22, 2017, 12:51:13 AM

I designed and built a while back for the DC engineering fair.

Title: Re: My CNC/PC controller Enclosure
Post by: vtsteam on July 22, 2017, 10:10:03 AM

Well, nice aesthetic job of design. A good teaching tool.

In my shop, though it would look like hell a year later, even if I avoided placing it under the router, as would have  been my preference. Metal, swarf, sawdust, plastic static, coolant, WD-40 would quickly diminish the art gallery look. I also like the RF shielding afforded by a metal case. But certainly an admirably executed project.

Title: Re: My CNC/PC controller Enclosure
Post by: Brass_Machine on July 23, 2017, 12:18:12 PM

I can see the PC case modding influences in your work! Cool and interesting!

Eric

Title: Re: My CNC/PC controller Enclosure
Post by: msimpson on July 28, 2017, 12:27:43 AM

I have been hunting for some pics of various PC cases I have built with the CNC.

I will post them as I find them.

This is one I did about 8 years ago.  It is a home theater PC.  It (at the time) was connected to my projector and sound system.  It only had a single button under the unit near the front to turn it on and off.  Every thing else was done with Bluetooth and remotes.

Title: Re: My CNC/PC controller Enclosure
Post by: Brass_Machine on July 28, 2017, 09:01:01 AM

Very nice looking case!

Eric