MadModder
The Breakroom => The Bookshelf => Topic started by: PTsideshow on December 03, 2009, 11:44:02 AM
-
How to Build the
Wet/Dry Vac Precision
Air Controller for
Forge and Foundry
Don A Meador.
Copyright ©2004
Millennial Marketing
Booklet 22 pages
(http://i35.photobucket.com/albums/d200/ptsideshow/assorted/welding%20books/Books0532.jpg)
This slim, volume will answer questions, some may have in using the wet dry vac or it could be adapted to any air source of a powered drive. He starts with the
Air Diverter Unit
General Considerations for Connecting The Air Controller
He covers ways to connect it to his style;
Blacksmith Firepot
Commercial Firepot
Charcoal Foundry Furnace
Running the air controller,along with an idea and design for a deluxe connection box so the flimsy on/off switch on the vac doesn't have to be changed.
Very nice and concise,clear line drawings and a couple of photo's this unit is for solid fuel. Charcoal, soft coal or coke in both forge and metal melting furnace.
It is available from either or
Lindsay books (http://www.lindsaybks.com/)
Nation builders books (http://www.nbbooks.com/)