Author Topic: Modify A Ford Block  (Read 8631 times)

Offline doubleboost

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 1619
  • Country: gb
  • Newcastle Upon Tyne
Modify A Ford Block
« on: March 02, 2011, 05:00:41 PM »
A feiend of mine is building a hybrid ford engine for a sprint car
It is a 2 litre zetec block bored out to 2.1 with a ford cvh head and turbo bolted on top
Anyway after he plied me with drink i agreed to do his water pump and tensioner mods as well as some big crank case drains.
My machine tools are not small but this took some fiddling with

would not go under the mill or the ped drill
not high tech but pop crates are very square

breather hole

the hole was a bit on the big side so i made a expander


that wont leak or drop out


pump & tensioner in place

Offline Brass_Machine

  • Administrator
  • Hero Member
  • *****
  • Posts: 5504
  • Country: us
Re: Modify A Ford Block
« Reply #1 on: March 02, 2011, 09:12:26 PM »
Nice job!. Why did the water pump and tensioner need mods?

Eric
Science is fun.

We're all mad here. I'm mad. You're mad.

Rob.Wilson

  • Guest
Re: Modify A Ford Block
« Reply #2 on: March 03, 2011, 11:09:24 AM »
So Thats what you have been up to John  :clap: :clap: :clap: :clap: :clap: :clap:  :dremel:



Rob  :D