Author Topic: stuart turner 10v help  (Read 11197 times)

Offline earnie

  • Jr. Member
  • **
  • Posts: 6
stuart turner 10v help
« on: April 30, 2011, 03:59:30 PM »
hi all this is my first post here
i recently aquired a stuart 10v kit and need the book on how to build this or drawings
any and all help would be appreciated
this kit is about 60% machined
there are many questions to be asked but i cant logically ask these till i have plans or books
i ordered a plans set from stuart dont have an idea when it will arrive as i live in the us and the plans are coming from the uk
i see a book was published regarding this model called " building  a vertical steam engine from castings " by andrew smith, revised by pengwern

does anyone have a copy of this book or where one could source this thanks

Offline Bluechip

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 1513
  • Country: england
  • Derbyshire UK
Re: stuart turner 10v help
« Reply #1 on: April 30, 2011, 04:21:11 PM »
hi all this is my first post here
i recently aquired a stuart 10v kit and need the book on how to build this or drawings
any and all help would be appreciated
this kit is about 60% machined
there are many questions to be asked but i cant logically ask these till i have plans or books
i ordered a plans set from stuart dont have an idea when it will arrive as i live in the us and the plans are coming from the uk
i see a book was published regarding this model called " building  a vertical steam engine from castings " by andrew smith, revised by pengwern

does anyone have a copy of this book or where one could source this thanks

Hi Earnie

Welcome to the Forum  :thumbup:

UK source herewith:

http://www.camdenmin.co.uk/construction-manuals/building-a-vertical-steam-engine-p-2094.html

Also apparently on Amazon US for some horrendous prices 'used'

IF it's the same book ??

Dave BC
« Last Edit: April 30, 2011, 04:24:23 PM by Bluechip »
I have a few modest talents. Knowing what I'm doing isn't one of them.

Offline saw

  • Hero Member
  • *****
  • Posts: 1003
  • Country: se
  • lucky amateur
    • Svenssons AckordsWerkstad
Re: stuart turner 10v help
« Reply #2 on: April 30, 2011, 04:36:52 PM »
Hi earnie is it the drawing that you need?
_________________________
Greetings / Benni
http://myprojecty.wordpress.com/category/steam-engine/

Offline earnie

  • Jr. Member
  • **
  • Posts: 6
Re: stuart turner 10v help
« Reply #3 on: April 30, 2011, 04:40:10 PM »
Hi earnie is it the drawing that you need?
yes i need the drawing and any and all advice on these things thanks

Offline raynerd

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 2893
  • Country: gb
    • Raynerds Projects - Raynerd.co.uk
Re: stuart turner 10v help
« Reply #4 on: April 30, 2011, 07:08:24 PM »
pm sent  :D

Offline earnie

  • Jr. Member
  • **
  • Posts: 6
Re: stuart turner 10v help
« Reply #5 on: May 02, 2011, 12:02:10 AM »
Hi earnie is it the drawing that you need?
thank you sir email received great drawings
thanks

Offline saw

  • Hero Member
  • *****
  • Posts: 1003
  • Country: se
  • lucky amateur
    • Svenssons AckordsWerkstad
Re: stuart turner 10v help
« Reply #6 on: May 02, 2011, 04:19:41 AM »
You are welcome(not sir I am Benni  :D)
_________________________
Greetings / Benni
http://myprojecty.wordpress.com/category/steam-engine/

Offline madjackghengis

  • Hero Member
  • *****
  • Posts: 717
  • big engine
Re: stuart turner 10v help
« Reply #7 on: May 03, 2011, 11:47:40 AM »
Hi Earnie, welcome to the pack :beer:  I'm glad you got some drawings, and hope to see some metal chips soon, and see you on your way to a fine engine that runs.  It's always great to see new names and new projects on the site, the more the merrier.  Good luck with that Stuart,  :beer:  Cheers, Jack

Offline earnie

  • Jr. Member
  • **
  • Posts: 6
Re: stuart turner 10v help
« Reply #8 on: May 05, 2011, 03:36:34 PM »
thanks gents, this thing does require some work, however im ok with it,
since i dont have a lathe= :( i have turned over the centering and drilling of the flywheel,the manufacturing of the eccentric bushing, and mannufacturing of the piston to a freind at work
the rest of this i can handle here at home :)
thanks for the help here

Offline saw

  • Hero Member
  • *****
  • Posts: 1003
  • Country: se
  • lucky amateur
    • Svenssons AckordsWerkstad
Re: stuart turner 10v help
« Reply #9 on: May 05, 2011, 03:58:29 PM »
It's good that you have a friend to help you, but it is a heavy way to build a engine on  :doh:
_________________________
Greetings / Benni
http://myprojecty.wordpress.com/category/steam-engine/

Offline earnie

  • Jr. Member
  • **
  • Posts: 6
Re: stuart turner 10v help
« Reply #10 on: May 05, 2011, 04:51:03 PM »
thanks benni, the drawings you sent show me that at least 70% was finished
i beleive that i am off in a good way to finishing this
i will put up some pics soon of what i have

Offline saw

  • Hero Member
  • *****
  • Posts: 1003
  • Country: se
  • lucky amateur
    • Svenssons AckordsWerkstad
Re: stuart turner 10v help
« Reply #11 on: May 05, 2011, 04:58:17 PM »
I am very glad that I could help you. :thumbup:
_________________________
Greetings / Benni
http://myprojecty.wordpress.com/category/steam-engine/