Author Topic: Presentation  (Read 7266 times)

Offline Unkas

  • Newbie
  • *
  • Posts: 3
Presentation
« on: January 20, 2019, 12:13:40 PM »
Hello everyone, I have made a cnc with a DDCSV1.1 and updated it to Pandora 2018. I am enrolled in this forum so I can learn and get the most out of my cnc.
Regards    :D

Offline awemawson

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8966
  • Country: gb
  • East Sussex, UK
Re: Presentation
« Reply #1 on: January 20, 2019, 12:18:28 PM »
Welcome aboard Unkas  :thumbup:

Tell us all about what you are up to and your workshop - pictures are good (800 x 600 please)

Andrew Mawson
East Sussex

Offline Unkas

  • Newbie
  • *
  • Posts: 3
Re: Presentation
« Reply #2 on: January 20, 2019, 12:26:04 PM »
Hello awemawson, because I am dedicated to the maintenance of companies and I have a machining workshop with milling lathes, drills ... greetings

Offline WeldingRod

  • Sr. Member
  • ****
  • Posts: 400
Re: Presentation
« Reply #3 on: January 20, 2019, 03:44:31 PM »
We love machines here!
I've got a DDCSV that started running the carcass of a Wizard engraver from the 80's, and now runs an Ox with a rotary axis and laser.  Of course, it isnt running now while I relocate a stepper motor to clear the motor mount.

Sent from my SAMSUNG-SM-G891A using Tapatalk


Offline krv3000

  • Hero Member
  • *****
  • Posts: 2183
  • Country: gb
Re: Presentation
« Reply #4 on: January 20, 2019, 06:50:06 PM »
hi and welcome